Ubiquiti SM-RM-C - Roof Mount Kit

Ubiquiti SM-RM-C - Roof Mount Kit

The Roof Mount Kit is the structural mount between the roof structure and
the solar panel. The mount uses roof flashing to ensure a watertight
roof connection. The Roof Mount Kit is intended for use on asphalt
composite shingle roofs and as a base mount for tile roofs when used in
conjunction with the Tile Roof Accessory Kit, model SM-RM-T.

Below are the components of the kit:

• 10x Roof Mount
• 20x Washer, M8
• 20x Screw, Lag, 8 x 75 mm
• 10x Roof Flashing, Base
• 10x Screw, M8 x 1.25 x 30
• 10x Washer, 8.4 x 24 x 2.5
• 10x Counter Flashing

• Allowable roof slope: 9.5 to 45° (2:12 to 12:12)
• Maximum mount span: Up to 1220 mm (48")
• Maximum cantilever: 400 mm (15 3/4") Portrait, 500 mm (19 11/16") Landscape
• Building height: < 18.3 m (< 60)
• Maximum windspeed: 240 km/h (150 mph)*
• Panel orientation: Landscape and Portrait
• Wind exposure category: B, C, D
• Maximum ground snow load: 3590 Pa (75 psf )
• System dead load: 11.6 kg (25 lbs) per mount**
• Height adjustability: 0-21 mm (0 - 0.83")
• Panel connectors: 2 or 4-way integrated grounding couplers
• Cables support clips: Black UV-resistant polycarbonate
• Trim skirt: Available in 3 different lengths
• Cabling: IP67 rated UL and NEC compliant connectors
• Component materials: Aluminum and steel
• Component finishes: Black coatings
• Hardware: Geomet-plated steel
• Certifications: UL2703 (pending)
• Fire certification: Class A rating for steep slope roofs per UL2703
• Withdrawal force within dry douglas fir (SG=0.46) with 35 mm rafter penetration: 11,800 N (2650 lbs)
• Maximum side load: 1000 N (224 lbs)
• Flashings: IBC compliant flashings, galvanized steel
• Lag screws: (2) steel 8 x 75 mm
  
  * See installation instructions for restrictions
  ** Based on two mounts per panel
  

Écrire un avis

Votre nom :


Votre avis : Note : Le HTML n’est pas pris en charge !

Évaluation : Mauvais           Bon

Saisir le code ci-dessous :