LTU-LITE - 5 GHz PtMP LTU Client Radio

LTU-LITE - 5 GHz PtMP LTU Client Radio

Featuring an integrated antenna, the LTU-Lite is a compact, cost-effective subscriber station utilizing the 5 GHz radio band. It functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU-Rocket(R) as the base station.

Proprietary LTU Technology

Based on Ubiquiti's LTU technology, the LTU-Lite is not impeded by the limitations of standard 802.11 Wi-Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps of real TCP/IP throughput and modulation rates of up to 4096 QAM.

CPE Modes

The LTU-Lite supports both bridged and built-in hardware NAT router modes to suit your specific deployment.

Frequency Split

The LTU-Lite can use different frequencies for TX and RX to avoid interference.

Convenient Mount Options

The LTU-Lite is designed for quick yet reliable mounting on a pole or on a wall. All necessary mounting hardware is included.

Channel Width Flexibility

Channel width flexibility allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Channel width options include:

• 10 MHz
• 20 MHz
• 30 Mhz
• 40 MHz
• 50 MHz
• up to 100 MHz

Auto Power Adjustments

By default, the "Auto Output Power" option allows the LTU-Lite to set the output power (EIRP) to the appropriate level.

Signal Control

The LTU-Lite's TX output power is controlled by the AP's target TX output power. A PtMP network can manage signal levels to enhance network stability and achieve optimal wireless performance with the highest possible modulation.

Convenient Configuration

To manage the LTU-Lite, you have two options: the LTU Configuration Interface and Ubiquiti Network Management System (UNMS(TM)). Either option lets you manually configure the LTU-Lite.

Within the LTU Configuration Interface, you can manually configure the LTU-Lite or manage it from the AP side using the "Find My AP" feature. The LTU-Lite will automatically scan for APs using the same channel bandwidth. Select the appropriate AP and then use it to configure the LTU-Lite.

• Dimensions: 153 x 84 x 39.5 mm
• Weight: 250 g
• Networking interface: (1) 10/100/1000 Ethernet port
• Enclosure: Outdoor UV stabilized plastic
• Max. power consumption: 8.5 W
• Power supply: 24 V, 0.5 A Gigabit PoE adapter (included)
• Power method: 24 V passive PoE (pairs 4, 5+; 7, 8-)
• Voltage range: 22 - 26 V
• Max. conducted TX power: 22 dBm per chain
• Gain: 13 dBi
• Cross-pol isolation: 20 dB minimum
• Max. VSWR: 1.8:1
• Beamwidth: 45° (H-pol)/45° (V-pol)/45° (elevation)
• Polarization: Dual linear
• Mounting: Pole mount/wall mount (kit included)
• Wind loading: 20 N (at) 200 km/h (4.5 lbf (at) 125 mph)
• Wind survivability: 200 km/h (125 mph)
• ESD/EMP protection: +/-24 kV contact/air
• Operating temperature: -40°C to 60°C (-40°F to 140°F)
• Operating humidity: 5 to 95% non-condensing
• Certifications: CE, FCC, IC

Écrire un avis

Votre nom :


Votre avis : Note : Le HTML n’est pas pris en charge !

Évaluation : Mauvais           Bon

Saisir le code ci-dessous :